Properties listed in the table below are representative of polymer properties in their solid form and highly influenced by stress and chemical environments.



The shelf life of Porex Porous Plastics can be affected by temperature and exposure to ultra violet light. Due to the large surface areas exposed in a porous product, the effects of oxidation are exaggerated and can be accelerated under elevated temperature and exposure to direct sunlight. Most molded and fiber products can be stored from 18 – 24 months provided they are stored in a sealed condition, at room temperature and low light environment. Sheet products can typically be stored for 12 months. Many times custom developed products may contain additives to enhance a functional characteristic of the product. The entire formulation must be considered when making assumptions regarding shelf life.

It Is Important To Note . . .

Porex cannot anticipate or control the conditions under which the technical data and products may be used. Porex does not guarantee the applicability or accuracy of the information or the suitability of our products in any given situation. Unless otherwise noted, the data on service temperatures; softening and melting points; solvent resistance; coefficient of thermal expansion and tensile strength are for the polymer in solid form. All of these properties will be lower from the porous form of the polymer. Users should make their own tests to determine the suitability of each product for their particular application. The products discussed are sold without such warranty, either expressed or implied. Statements concerning the possible use of Porex products are not intended as recommendations or infringement of any patent.